Inconsistent powder drops
Inconsistent powder drops
So I set up a new mec 650 jr 20 ga loader. In the past I've always used a universal charge bar and just adjusted my drops to suit my recipe. I had some bushings lying around so I decided to try a 7/8 oz load that calls for 14.6 of green dot max. According to my bushing chart a #24 bushing should drop 14.5, but real world I consistently get 13.1. Is this common for these bushings to be so far off?
- birddog1968
- GDF Junkie
- Posts: 3043
- Joined: Wed Mar 04, 2009 2:40 pm
- Location: Wherever I may roam
Re: Inconsistent powder drops
Yes, its pretty normal and why i weigh my loads and get an average, then decide which bushing serves you best.
The second kick from a mule is of very little educational value - from Wing and Shot.
Hunters Pale Rider
Hunters Branch Jalapeno
Hunters Pale Rider
Hunters Branch Jalapeno
-
- GDF Junkie
- Posts: 1630
- Joined: Tue Feb 16, 2010 7:23 pm
- Location: State?...The one where ruffed grouse were.
Re: Inconsistent powder drops
Very normal, with some powders especially....tho seldom more than a bushing either side.
One can hone or tape them but the low price would indicate test and mark is wisest.....volumes thrown may be off but the powder drop will be consistent if the loader operation is consistent.
I had more issues with the adjustable bar...I prefer bushings.
One can hone or tape them but the low price would indicate test and mark is wisest.....volumes thrown may be off but the powder drop will be consistent if the loader operation is consistent.
I had more issues with the adjustable bar...I prefer bushings.
- Greg Jennings
- GDF Junkie
- Posts: 5743
- Joined: Tue Apr 20, 2004 11:59 am
- Location: Springboro, OH
Re: Inconsistent powder drops
I start with the closest under throwing bushing and open it up. When you get it close, polish it very smooth. I use Iosso bore cleaner because I have it. Toothpaste would probably work about as well.
FC Snips Spot-On Shooter SH
http://www.perfectpedigrees.com/4genview.php?id=3149
http://www.perfectpedigrees.com/4genview.php?id=3149
Re: Inconsistent powder drops
I guess I will buy some more bushings, What problems have you had with the adjustable bar? I just set it and double check it every once in a while but it's always just where I left it.
-
- GDF Junkie
- Posts: 1630
- Joined: Tue Feb 16, 2010 7:23 pm
- Location: State?...The one where ruffed grouse were.
Re: Inconsistent powder drops
The adj. bar never appeared as consistent, may have been me.
Many folsk love them.
I loaded a variety of recipes with several powders....simplest, once correct, to use bushings, for me.
I do understand the appeal and marketing appeal of a single bar, use what works for you is best.
Many folsk love them.
I loaded a variety of recipes with several powders....simplest, once correct, to use bushings, for me.
I do understand the appeal and marketing appeal of a single bar, use what works for you is best.
- Greg Jennings
- GDF Junkie
- Posts: 5743
- Joined: Tue Apr 20, 2004 11:59 am
- Location: Springboro, OH
Re: Inconsistent powder drops
A polished bushing *does* throw more consistent. Way back when, I did a statistical analysis on it. What can I say, I was a math major in college at the time.
Another thing to look at. If you are shooting in competition with reloads, weigh the charge of shot thrown. I always found mine to be throwing light and opened them up. It was worth a few more shot in the pattern.
Greg J.
Another thing to look at. If you are shooting in competition with reloads, weigh the charge of shot thrown. I always found mine to be throwing light and opened them up. It was worth a few more shot in the pattern.
Greg J.
FC Snips Spot-On Shooter SH
http://www.perfectpedigrees.com/4genview.php?id=3149
http://www.perfectpedigrees.com/4genview.php?id=3149
Re: Inconsistent powder drops
Good info thanks guys.
- prairiefirepointers
- Rank: 5X Champion
- Posts: 1142
- Joined: Mon Sep 01, 2008 11:34 am
- Location: Pretty Prairie, Kansas USA
Re: Inconsistent powder drops
Green Dot, IMO, has a habit of metering poorly. I now shoot Clays for several reasons.
Jess Stucky
Prairie Fire Pointers & Supply
Pretty Prairie, KS
http://www.prairiefirepointers.com
http://www.prairiefirepointersupply.com
'Distinguished Dogs for the Discriminating Hunter'
Doesn't Your Dog Deserve The Best?
"Add clarity to your life, see through the eyes of a dog"
Prairie Fire Pointers & Supply
Pretty Prairie, KS
http://www.prairiefirepointers.com
http://www.prairiefirepointersupply.com
'Distinguished Dogs for the Discriminating Hunter'
Doesn't Your Dog Deserve The Best?
"Add clarity to your life, see through the eyes of a dog"
- gotpointers
- Rank: 5X Champion
- Posts: 995
- Joined: Thu Apr 29, 2010 2:27 am
- Location: Belen,Nm
Re: Inconsistent powder drops
Are you using the powder baffle that comes with the adjustable bar for the bushings? I hate bushings. I love how i can tune the shot discharge perfectly for the perfect crimp with an adjustable bar. All my loaders have the adjustable except my mec progressive 20 guage loader. I think its a POS and i should have stuck with the Jr.
Re: Inconsistent powder drops
prairiefirepointers wrote:Green Dot, IMO, has a habit of metering poorly. I now shoot Clays for several reasons.
I use green dot because that is what I can get most consistenly right now. A couple years ago we had a sportsmans warehouse and I used clays from there and it was pretty good. The metering I get with green dot is pretty darn consistent out of the universal bar as well as the bushings, the inconsistency was with what the charts were suggesting the bushings should drop and what they were actually dropping. Does that make sense?
Re: Inconsistent powder drops
gotpointers wrote:Are you using the powder baffle that comes with the adjustable bar for the bushings? I hate bushings. I love how i can tune the shot discharge perfectly for the perfect crimp with an adjustable bar. All my loaders have the adjustable except my mec progressive 20 guage loader. I think its a POS and i should have stuck with the Jr.
I only have a universal bar on my 12 ga sizemaster and yes I use the baffle on that. I'm with you about the bushings I order a few more and they weren't what I need either. I'm just gonna spend the money for another universal for my 20.
- gotpointers
- Rank: 5X Champion
- Posts: 995
- Joined: Thu Apr 29, 2010 2:27 am
- Location: Belen,Nm
Re: Inconsistent powder drops
Try the baffle with the bushings. If you need a parts i may already have them or something from sportsmans text me.
Re: Inconsistent powder drops
gotpointers wrote:Try the baffle with the bushings. If you need a parts i may already have them or something from sportsmans text me.
Thanks, I was out your way this weekend for the NM state bodybuilding show looks like you guys have been getting rain. Also you price of hay is 2-3 dollars cheaper per bale than what I find down here. We have got decent rain this summer so I think it's just farmers taking advantage of last year. I'm trying to figure out if spending the money to go get it from up there is any savings from buying it down here.
- gotpointers
- Rank: 5X Champion
- Posts: 995
- Joined: Thu Apr 29, 2010 2:27 am
- Location: Belen,Nm
Re: Inconsistent powder drops
Its rained almost daily. I can get you pretty good small bales for 7.00 from my neighbor. Or 3 x 3 bales 800 lb ,of #1 horse hay for 120 they also have 3 strand arizona bales for 17 around here.
Re: Inconsistent powder drops
Thats not bad I will proably be giving you a call in a couple weeks when I need to stock up