Primer inserts for 20 gauge

wems2371 · Post by **wems2371** » Fri Oct 14, 2011 9:02 pm

In training, I want to switch over from my 209 primer pistol, to my 20 gauge. I don't want to use live rounds and poppers are pricey. I have heard of a primer insert, that would be an alternative to poppers. Does anyone know what I'm talking about, have any good or bad thoughts/experiences with them, or maybe have a recommendation or link to share for purchase? Thanks.

I didn't find a lot with a Google search, but I did find this one:
http://www.marleydogsupplies.com/produc ... ect-Gauge)

live4point · Post by **live4point** » Sat Oct 15, 2011 12:07 am

Lion country supply has what your looking for.

DonF · Post by **DonF** » Sat Oct 15, 2011 10:33 am

You have what you looking for and it's almost free. Take a fired 20ga hull and drill a 1/4" hole thru the primer pocket. Primers slip in and come out very easy.

AHGSP · Post by **AHGSP** » Sat Oct 15, 2011 7:26 pm

This is the one I use, it ejects the primers and NOT the insert. Been using it for quite a few years now and wouldn't be without it.

http://www.shady-grove.com/shotguninsert.htm

DonF · Post by **DonF** » Sun Oct 16, 2011 8:55 am

Those really look nice. Lucky I haave a 410 if I got them I don't have a 12ga or a 20ga anymore. I would get a set of those, not quite so expensive as I though. Cures my one problem with used hulls too. Twenty shots or so and you need new hulls, the base isn't strong enough and starts to concave badly.

Gun Dog Forum

Primer inserts for 20 gauge

Primer inserts for 20 gauge

Re: Primer inserts for 20 gauge

Re: Primer inserts for 20 gauge

Re: Primer inserts for 20 gauge

Re: Primer inserts for 20 gauge