BROWNING A-5

Post Reply
ridgerunner
Rank: Junior Hunter
Posts: 97
Joined: Wed Aug 03, 2011 5:24 pm
Location: EAST TN.

BROWNING A-5

Post by ridgerunner » Thu Aug 04, 2011 6:04 pm

Just wandering if anybody on here shots a Browning A-5 20GA.? If you do tell me what you think of the gun...please.

User avatar
topher40
GDF Junkie
Posts: 2306
Joined: Sat Feb 11, 2006 3:09 pm
Location: NE Kansas

Re: BROWNING A-5

Post by topher40 » Thu Aug 04, 2011 6:13 pm

I owned a couple of years ago, got in on a trade for services. I tested it thoroughly before I sold it and it was flawless. It was a FANTASTIC weapon.
Chris E. Kroll
CEK Kennels
http://www.cekkennels.com
785-288-0461


Governments govern best when governments governs least


-Thomas Paine

User avatar
mcbosco
GDF Junkie
Posts: 3577
Joined: Wed Jun 10, 2009 6:22 pm
Location: Monmouth County NJ

Re: BROWNING A-5

Post by mcbosco » Thu Aug 04, 2011 6:28 pm

They are awesome guns and not hard to find a nice one. I don't know enough about them to recommend the best ones in terms of production date, perhaps others can. I never found the standard A-5 heavy but some people say that.

Franchi ripped off the design when it brought out the 48AL years and years ago.

Mountaineer
GDF Junkie
Posts: 1630
Joined: Tue Feb 16, 2010 7:23 pm
Location: State?...The one where ruffed grouse were.

Re: BROWNING A-5

Post by Mountaineer » Thu Aug 04, 2011 8:13 pm

Not a 20 gauge but I have a Sweet 16....beautiful gun...Love it.
The 26" plain barrel Sweet 16s are considered top grouse guns by many when in IC....likely about 6 3/4#, maybe a bit less with some wood densities.
Mine is 28" plain barrel and modified...7# on the nose.
Wonderful pheasant gun.
20s, if of the Belgian mfg would also be fine guns.
The Mirokus are much heavier in general.
The 1950s are often thought to be the top quality period for A-5s.
Even the light 12s are brutes...wonderful brutes but heavy.

Midwest Gunworks is a good spot for Browning gunsmithing if needed.
They have a spring replacement kit that is a good idea for some older A-5s.

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Fri Aug 05, 2011 7:25 am

I own an A5 20 ga with 28in barrel vent rib made in Belgium. It is a VERY nice gun. My main squeeze is a Benelli M1 20ga. The Benelli is the best of the present day guns, while the Browning is the best of the past. It is very well balanced, shoots a 3in. mag and points beautifully. It is a real gem.
Browning quit making the A5 years back and have not even begun to replace it. They have made several efforts with the gold models, which in comparison suck. If they would only come out with a modern A5 with alloy receiver they would give Benelli a run for their money.
If you can find a used A5 20 ga. buy it. If you don`t the next guy through the door will.

User avatar
Greg Jennings
GDF Junkie
Posts: 5743
Joined: Tue Apr 20, 2004 11:59 am
Location: Springboro, OH

Re: BROWNING A-5

Post by Greg Jennings » Fri Aug 05, 2011 7:36 am

Depends on what you want to use it for.

If you want to hike up and down chukar mountains, I'd find something lighter. If you want to shoot 200 clay targets on the weekend, well, it'll be stocked too low and be too light in the front.

If you want a day-to-day hunting gun, they're great.

Best? I don't think there is one best.

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Fri Aug 05, 2011 9:19 am

The A5 twenty is much lighter than the 12ga. While I haven`t weighed mine, I would put it at around 6lbs.

User avatar
Greg Jennings
GDF Junkie
Posts: 5743
Joined: Tue Apr 20, 2004 11:59 am
Location: Springboro, OH

Re: BROWNING A-5

Post by Greg Jennings » Fri Aug 05, 2011 12:32 pm

6lbs would be pretty nice. It's been years since I had mine, but I remember it being heavier. It had high-grade wood, a rib and a Cutts. All that might have added up.

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Fri Aug 05, 2011 2:47 pm

6lbs would be pretty nice. It's been years since I had mine, but I remember it being heavier. It had high-grade wood, a rib and a Cutts. All that might have added up.
I just did a quick google search and I found an article that states the Japanese models weigh 6.5 lbs, and the Belgium models were a little bit lighter. So I think 6lbs is pretty close.

bulldog18
Rank: Just A Pup
Posts: 2
Joined: Sat Jul 30, 2011 2:17 pm

Re: BROWNING A-5

Post by bulldog18 » Fri Aug 05, 2011 4:45 pm

Great guns. Mine has killed its share of quail and doves. I have rebuilt numerous A5's in my shop. I have never encountered a worn out A5 that new springs, firing pin, extractors and new wood would not cure.

User avatar
mcbosco
GDF Junkie
Posts: 3577
Joined: Wed Jun 10, 2009 6:22 pm
Location: Monmouth County NJ

Re: BROWNING A-5

Post by mcbosco » Sat Aug 06, 2011 6:30 am

This thread inspired me to look for one from the 1950's.

Mountaineer
GDF Junkie
Posts: 1630
Joined: Tue Feb 16, 2010 7:23 pm
Location: State?...The one where ruffed grouse were.

Re: BROWNING A-5

Post by Mountaineer » Sat Aug 06, 2011 12:37 pm

If you have a factory true 6# 20 gauge A-5 then put it in the drawer with the hen teeth...you got a special one.

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Sat Aug 06, 2011 2:01 pm

If you have a factory true 6# 20 gauge A-5 then put it in the drawer with the hen teeth...you got a special one.
Can I assume that you think I am wrong? :roll:

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Sat Aug 06, 2011 2:17 pm

Here is the link that I read.
http://www.chuckhawks.com/browning_A-5_20mag.htm

If I had a good way of weighing my gun I would, but I tried the bathroom scale and it isn`t that accurate. I would put it at 6-6.5 lbs.

Mountaineer
GDF Junkie
Posts: 1630
Joined: Tue Feb 16, 2010 7:23 pm
Location: State?...The one where ruffed grouse were.

Re: BROWNING A-5

Post by Mountaineer » Sat Aug 06, 2011 2:18 pm

Vman wrote:
If you have a factory true 6# 20 gauge A-5 then put it in the drawer with the hen teeth...you got a special one.
Can I assume that you think I am wrong? :roll:
:roll: Not really, you can assume that I think you are lucky to have a 28" vent rib 20 bore A-5 model so light. :roll:
As I earlier implied, wood density can make a world of difference.
I think we both enjoy the A-5s...why not leave it at that whether you actually weigh your scattergun, or not.


*I find a world(8 ounces) of difference between 6# and 6 1/2# re a 20 gauge A-5....some obviously do not.

Vman
Rank: 2X Champion
Posts: 499
Joined: Tue Aug 01, 2006 1:35 pm
Location: Baraboo Wi.

Re: BROWNING A-5

Post by Vman » Sat Aug 06, 2011 5:00 pm

I just measured my barrel and it is 27in. from muzzle to reciever.
I have hunted with many A5 12 gauges and while I love them they are just too heavy to lug around all day. This 20 gauge is not bad at all to carry, but I only carry three rounds also. It is a very nice gun that I don`t use all that often. It is probably 92% and I would like to keep it that way. But it is one deadly weapon and I have pulled some shots with it that hunting partners could not believe. One great Gun.

User avatar
setterbud
Rank: Junior Hunter
Posts: 46
Joined: Wed Feb 04, 2009 10:54 am
Location: warrenton,mo

Re: BROWNING A-5

Post by setterbud » Mon Aug 08, 2011 5:38 am

i bought my 20 in 1969, when i was 19. saved for a year, found a used one, 1967, 26in bar, cyl choke onyl time it was worked on was after i got it put a left hand saftey on it for $5.00
i use it every year

MO_GSP
Rank: Senior Hunter
Posts: 162
Joined: Fri Apr 15, 2011 10:43 am
Location: SWMO

Re: BROWNING A-5

Post by MO_GSP » Tue Aug 09, 2011 10:27 pm

im embarrassed to admit that i missed out on a steal on one of these a few yrs ago. ran across one at a pawn shop while killing time waiting to meet a friend for dinner, anyway i didnt know anything about it and passed on it a couple days later i drove back up to buy it but of course it was gone :(

reba
Rank: 4X Champion
Posts: 626
Joined: Wed Jul 01, 2009 8:50 am
Location: Central Coast of CA

Re: BROWNING A-5

Post by reba » Sat Aug 27, 2011 6:31 pm

I have one in both 12 and 20 gauge.

I now only use the 20 ga.

One of the BEST if not the BEST shotguns ever made.

The four hardcore chukar hunters I hunt with all carry 20 ga A5's.

Will need to be cleaned after 250 shots.

dub113
Rank: Just A Pup
Posts: 11
Joined: Thu Sep 08, 2011 12:44 pm

Re: BROWNING A-5

Post by dub113 » Fri Sep 09, 2011 4:46 pm

I have a Belgium a-5 and a jap light 12 a-5,and they are awesome..I also have a benelli skeet gun,ported barrel,good tigger,extended chokes...can shoot my light 12 better on any day of the week..can't go wrong with any a-5 in my opinion.

skeetermc
Rank: Junior Hunter
Posts: 44
Joined: Wed Sep 07, 2011 7:46 pm
Location: Amarillo TX

Re: BROWNING A-5

Post by skeetermc » Fri Nov 04, 2011 8:37 am

Best shotgun ever made. I wish Browning would bring it back.

User avatar
Dirtysteve
Rank: 3X Champion
Posts: 592
Joined: Wed Nov 10, 2004 5:06 pm
Location: Utah

Re: BROWNING A-5

Post by Dirtysteve » Fri Nov 04, 2011 9:47 am

skeetermc wrote:Best shotgun ever made. I wish Browning would bring it back.
Here's there newest version. I haven't been real impressed with Browning semi auto's since they quit making the A5 and beretta quit making the b80 for them.
Maybe they got it right this time?

http://www.grandviewoutdoors.com/wing-a ... mp-is-Back!
http://www.gundigest.com/shotgun-review ... 5-humpback

User avatar
Garrison
Rank: 5X Champion
Posts: 1213
Joined: Tue Sep 06, 2011 5:29 pm
Location: Winchester CA

Re: BROWNING A-5

Post by Garrison » Fri Nov 04, 2011 10:19 am

I have a Belgium a-5 12, great gun but heavy. I have also read that you should not put steel shot through it. Not sure if this the same for the 20 but depending where you hunt may be a problem.
“Heaven goes by favor. If it went by merit, you would stay out and your dog would go in.”
- Mark Twain-

orbirdhunter
Rank: Senior Hunter
Posts: 196
Joined: Mon Aug 09, 2010 9:43 am
Location: Spokane washington

Re: BROWNING A-5

Post by orbirdhunter » Sat Nov 05, 2011 2:58 pm

I think that they are a cool part of american shotgunning history.....

I only have one personal experience shooting one. It was a 16 gauge, it seemed to be pretty light weight, i have no idea what kind of load i was shooting through it...i shot it 3 times that that was plenty enough, i was sure that i had blown my should clear off....i had never, ever shot a shotgun that kicked like that thing did....I have never had a desire to shoot one since....

User avatar
britspan
Rank: Junior Hunter
Posts: 62
Joined: Tue Nov 09, 2010 7:47 pm
Location: Greenville, SC

Re: BROWNING A-5

Post by britspan » Sat Nov 05, 2011 4:39 pm

Browning is re introducing them in Spring 2012. They have them advertised on there website.

Joenailer
Rank: Just A Pup
Posts: 2
Joined: Tue Nov 08, 2011 4:33 pm

Re: BROWNING A-5

Post by Joenailer » Tue Nov 08, 2011 4:45 pm

I've got the Japanese light twenty Browning. It's everything that's been said above BUT it will kick the crap out of you. I made the mistake of shooting 100 clays one afternoon. Sore for a week. Hunting, a different story, since around here if your even find wild birds , you don't take many shots

Post Reply